Wheelchairs and Transportation

RESNA Standards Committee on Wheelchairs and Transportation (WHAT)

Click here for information about the standards developed and maintained by this committee.
Click here to order standards from this committee.
Click here for a membership form to join this committee.

NEXT MEETING

Wheelchairs and Transportation will meet on Monday, July 11, 2016 from 8:00am-5:00pm at the Hyatt Regency Hotel in Arlington, Virginia in conjunction with the RESNA/NCART 2016 Conference.

OFFICERS

Headshot of Miriam Manary

Chair: Miriam Manary 
University of Michigan Transportation Research Institute
mmanary@umich.edu

Vice Chair: Shawn Shermer
U.S. Food and Drug Administration
shawn.shermer@fda.hhs.gov

Headshot of Nichole Orton

Secretary: Nichole Orton
University of Michigan Transportation Research Institute
nritchie@umich.edu

These standards affect:

  • People with physical disabilities who remain seated in their wheelchairs when traveling in motor vehicles, as well as their families and caregivers;
  • Wheelchair, tiedown/restraint, seating and vehicle manufacturers;
  • Transit providers, including paratransit, public transit, and school transportation groups;
  • Clinicians/rehab suppliers who prescribe wheelchairs and seating for people who use wheelchairs;
  • Rehabilitation and auto safety engineers and researchers; and,
  • Federal, state, and local governments and policy makers.

Safety standards are needed for wheelchairs, wheelchair seating systems, wheelchair tiedown and occupant restraints systems in all vehicles, as well as for wheelchair spaces on large accessible transit vehicles, to improve transportation safety and the independence and usability for people who travel in motor vehicles while seated in their wheelchairs.

Work Program

RESNA WC-4 Wheelchairs Volume 4: Wheelchairs and Transportation

This standard includes design and performance requirements, test methods, and requirements for manufacturer literature and product labeling for wheelchairs, wheelchair seating systems, WTORS, and wheelchair spaces on large accessible transit vehicles, intended for use in motor vehicles. The documents providing specifications for equipment used in the test methods, including the surrogate wheelchair (SWC), the surrogate four-point, strap-type tiedown (4-point SWTORS), and the surrogate wheelchair frame (SWCF) may be included as parts of the standard but they may also be published as separate technical reports that are referenced in the various parts of the standard.

The standard includes the following sections:

  • Section 10: Rear-facing wheelchair spaces in large, accessible transit vehicles
  • Section 18: Wheelchair tiedowns and occupant restraint systems for use in motor vehicles
  • Section 19: Wheelchairs used as seats in motor vehicles
  • Section 20: Wheelchair seating systems for use in motor vehicles

ISO Related Activities

ISO / TC 173 Assistive products for persons with disability / SC 1 Wheelchairs

ISO/TC 173/SC 1/WG 6 Wheelchair restraint systems Work program

  • ISO 7176-19 Wheelchairs Part 19: Wheeled mobility devices for use in motor vehicles
  • ISO 10542-1 Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test methods for all systems
  • ISO 10865-1 Wheelchair tiedown and occupant restraint systems for rearward facing wheelchair-seated passengers Part 1: Systems for accessible transport vehicles designed for use by both seated and standing passengers
  • ISO 10865-2 Wheelchair tiedown and occupant restraint systems for forward facing wheelchair-seated passengers Part 2: Systems for accessible transport vehicles designed for use by both seated and standing passengers
  • ISO 16840-4 Wheelchair seating Part 4: Seating systems for use in motor vehicles